Receiver ColibriDDC
Two receivers in a palm-sized case.

01 / 09 — ColibriDDC in a black enclosure, front three-quarter view.
Direct-sampling HF receiver: 0.1–55 MHz, two independent channels with sub-receivers. LAN connection and a direct headphone output.
- ADC
- 14bit
- receivers
- 2+2
- ADC
- 125MHz
- weight
- 160g
Explore from every angle

Loading 3D model…
Use the arrow keys to rotate and Home to reset the view. The mouse wheel scrolls the page.
Features
Lab and research
Undersampling receives signals above the ADC range, and IQ recordings are kept for analysis. Several receivers can run at once.
A receive site with a quiet band
Put the receiver where the band is quiet, at a country house away from city noise. The remote ColibriDDC receives, your home transceiver transmits.
RBN nodes
Four independent slices and data over TCI have made ColibriDDC a popular receiver for RBN skimmer nodes.
Direct headphone output
A built-in 24-bit audio codec feeds headphones directly.
Use Cases
- 01
Contest Skimmer Station
Round-the-clock automated band monitoring and CW/FT8 skimmer decoding across multiple bands.
- 02
Remote Listening Post
Install at a quiet countryside site and listen remotely over the internet from a city apartment.
- 03
SDR Panadapter
Use as a high-performance second receiver for conventional analogue transceivers via TCI.
ExpertSDR3, TCI and ERS
Free ExpertSDR3 with free updates. The open TCI protocol connects loggers, skimmers and digital-mode programs without virtual COM ports or audio cables; programs without TCI use the RadioSync bridge (CAT, OmniRig). Expert Remote System (ERS) is included: control from a browser or ExpertSDR3, directly or through the ExpertCloud service.
About the software- ExpertSDR3Free software for operating on the air
- TCIAn open protocol for loggers, skimmers and digital modes
- ERSRemote operation from a browser or ExpertSDR3
SpecificationsReceiver ColibriDDC
Receiver Characteristics
| HF receiver filters | LPF: 55 MHz |
|---|---|
| RF ADC, resolution | 14 bit |
| ADC type | ADS4145 |
| RX Frequency range | 0.1...55 MHz |
| Sample rate | 39; 78; 156; 312 @ 24 kHz / bit |
| RX in Nyquist zones | 0.1...800 MHz |
See all specifications for details
Specifications
| Local oscillator TCXO, frequency | 20 MHz |
|---|---|
| Local oscillator TCXO, accuracy | ±0.5 ppm |
| External 10 MHz oscillator input | Yes |
| RF input/output | 1 SMA |
| PC interface | LAN 100 Mbps |
| DC voltage range | 5.0...6.0 V |
See all specifications for details

Optional BPF-kit board with HF octave band filters
| 160M | 1.73 - 2.6 MHz |
|---|---|
| 80M | 2.6 - 4.3 MHz |
| 60M | 4.3 - 6.5 MHz |
| 40M | 6.5 - 7.9 MHz |
| 30M | 7.9 - 13.0 MHz |
| 20M | 13.0 - 15.9 MHz |
See all specifications for details













