Receiver ColibriNANO

HF receiver with USB connectivity.

DiscontinuedUSB SDR receiver

Direct sampling in a 90 × 25 × 17 mm enclosure. USB-powered, with a spectrum display and IQ recording up to 3072 kHz wide; reception in Nyquist zones up to 500 MHz.

ADC
14bit
2.0
USB
receivers
1+1
weight
43g

Discontinued

No longer sold. The page stays for owners: specifications and software compatibility.

Features

In the field, on the road, next to a laptop

Take ColibriNANO with you and plug it into a laptop wherever you need to monitor the bands.

Panorama and IQ recording

  • One software receiver with a sub-receiver.
  • Panorama and IQ recording up to 3072 kHz wide.
  • Nyquist-zone reception up to 500 MHz, with external band-pass filters.

Not only ExpertSDR3

ColibriNANO also works with HDSDR and SDRSharp through ExtIO.

Use Cases

  • 01

    Travel and field monitoring

    Fits in a backpack pocket: listen to radio signals from a hotel or outdoors with a compact antenna.

  • 02

    Transceiver panadapter

    Connect to an analogue transceiver's IF output to use it as a fast digital panadapter.

  • 03

    TCI integration

    Automatic frequency synchronisation with loggers over the open TCI protocol.

ExpertSDR3, TCI and ERS

Free ExpertSDR3 with free updates. The open TCI protocol connects loggers, skimmers and digital-mode programs without virtual COM ports or audio cables; programs without TCI use the RadioSync bridge (CAT, OmniRig). Expert Remote System (ERS) is included: control from a browser or ExpertSDR3, directly or through the ExpertCloud service.

About the software
  • ExpertSDR3Free software for operating on the air
  • TCIAn open protocol for loggers, skimmers and digital modes
  • ERSRemote operation from a browser or ExpertSDR3

SpecificationsReceiver ColibriNANO

Receiver Characteristics

Receiver Characteristics
HF receiver filtersLPF: 55 MHz
RF ADC, resolution14 bit
ADC typeADS4145
RX Frequency range0.1...55 MHz
Sample rate48; 96; 192; 384; 768 @ 24 1536; 1920; 2560; 3072 @ 16 kHz / bit
RX in Nyquist zones0.1...500 MHz

See all specifications for details

ColibriNANO — Receiver structure
ColibriNANO — Receiver structure

Specifications

Specifications
HF blocking dynamic range (BDR)110 dB
PC connection typeUSB 2.0
Maximum voltage at the antenna input without ADC overload74 (Pk-Pk); 32.7 (RMS) mV (ATT=0 dB)
Receiver temperature during operation+45...+55 °C
RF input with ESD protection up to 15kV1 SMA connector
Self-noise level1.9 MHz (160M) - 131 7.1 MHz (40M) - 130 52.5 MHz (6M) - 127 dBm

See all specifications for details

ColibriNANO — Digital interface
ColibriNANO — Digital interface

Documentation

© 2026 Expert Group LLC