Transceiver SunSDR2PRO
HF and VHF in a compact enclosure.

01 / 04 — Front view
DDC/DUC architecture: 15 W on HF and 6 m, 7 W on 2 m. LAN connection; a one-piece milled heatsink, weight 1.5 kg.
- HF
- 15W
- VHF
- 7W
- ADC
- 16bit
- Weight
- 1.5kg
Explore from every angle

Loading 3D model…
Use the arrow keys to rotate and Home to reset the view. The mouse wheel scrolls the page.
Features
Contests and SO2R
Two independent software receivers, each with a sub-receiver, allow reception on two HF bands and split operation for DX. Use the appropriate connection diagram for a contest setup with peripherals controlled over ExtCtrl.
Home shack and field
130 dB dynamic range on HF and 114 dB on VHF, 0.2 µV sensitivity and a +10 dB preamp keep you confident on a crowded band.
Field power
10–16 V on receive and 12–16 V on transmit: a switching supply or a battery will do.
2 m VHF and transverters
A built-in +22 dB VHF LNA and transverter support. With an external amplifier the PRO runs the whole set-up, and the kit stays portable.
Use Cases
- 01
Contesting
Two software receivers let you monitor different parts of the band and operate split. Use the appropriate connection diagram for an SO2R/SO2V setup.
- 02
DX Hunting
A wide panorama and an instant jump to the calling station's frequency in split operation provide an advantage in pileups.
- 03
Remote Operation
Streaming audio and the panorama over the internet allows operation from anywhere in the world.
- 04
Digital Modes (FT8/FT4)
Direct integration with WSJT-X and loggers via the TCI protocol, without virtual audio cables.
ExpertSDR3, TCI and ERS
Free ExpertSDR3 with free updates. The open TCI protocol connects loggers, skimmers and digital-mode programs without virtual COM ports or audio cables; programs without TCI use the RadioSync bridge (CAT, OmniRig). Expert Remote System (ERS) is included: control from a browser or ExpertSDR3, directly or through the ExpertCloud service.
About the software- ExpertSDR3Free software for operating on the air
- TCIAn open protocol for loggers, skimmers and digital modes
- ERSRemote operation from a browser or ExpertSDR3
Hardware headroom
ALC*
Input for external power amplifiers, controlled over ExtCtrl.
Full Duplex*
Full-duplex operation.
* The hardware supports these functions; software support comes in ExpertSDR3 updates.
SpecificationsTransceiver SunSDR2PRO
Receiver Characteristics
| RF ADC, resolution | 16 bit |
|---|---|
| RF ADC, sampling rate | 160 MHz |
| ADC type | LTC2209 |
| RX Frequency range | 0.1...65; 95...155 MHz |
| Sub-receivers | 2 pcs |
| Sample rate | 39; 78; 156; 312 @ 24 kHz / bit |
See all specifications for details
Transmitter Characteristics
| RF DAC, resolution | 14 bit |
|---|---|
| RF DAC, sampling rate | 640 MHz |
| TX Frequency range | 160-6; 2 m |
| Output power on HF | 15 (up to 20) W |
| Output power on 6M | 15 W |
| Output power on VHF | 7 (up to 8) W |
See all specifications for details
Specifications
| Local oscillator TCXO, frequency | 20 MHz |
|---|---|
| Local oscillator TCXO, accuracy | ±0.5 ppm |
| External 10 MHz oscillator input | Yes |
| RF input/output | 2 HF, 1 VHF, ADC IN, DAC OUT |
| PC interface | LAN 100 Mbps |
| DC voltage range in RX/TX | 10...16 / 12...16 V |
See all specifications for details













