Tuner AAT-100

Automatic antenna matching.

An antenna tuner for the 1.8–30 MHz range and power up to 120 W. A 50-ohm input; control and antenna cables are 3 m long each.

Max. power
~120W
Impedance
50Ohm
Cable
3m
Frequency
1.8–30MHz

Capabilities

The AAT-100 automatic antenna tuner is designed to connect to a SunSDR2DX transceiver. The maximum allowed SWR is 3.5.

Start tuning with the Tune button in the software. Tuning power: minimum 5 W, recommended 15 W, maximum 20 W. Tuner states are saved in 50 kHz steps; tuning stops at SWR 1.0–1.2.

Operating conditions

Antenna and power

  • Use with full-sized antennas at SWR up to 1:5.
  • Use short antennas with SWR above 1:5 with caution and keep output power at or below 30 W.

Compatibility and warranty

  • Transceivers EED06421900001…EED06421900100 and EED06511900101…EED06511900200 may require a voltage-stability hardware upgrade.
  • Tuning capacitors, inductors, relays and the SWR sensor are not covered by warranty.

SpecificationsTuner AAT-100

Specifications

Specifications
Control cable length3 m
Input impedance50 Ohm
Length of antenna cable3 m
Maximum input power~120 W
Operating frequency range1.8–30 MHz
Operating temperature range0...+55 °С
Specifications
Specifications

© 2026 Expert Group LLC